Procedure – Powder/Chip Samples

Instrument calibration/drift correction.

Add approximately 0.05 g of *** Graphite Powder to a***Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

Press the Analyze button on the instrument screen,the lower electrode will close and the analysis sequence will start and end automatically.

Repeat steps 3b through 3i a minimum of three times for each calibration/drift standard used.

ONH836氧氮?dú)浞治鰞x

高頻燃燒紅外檢測技分析無機材料中的碳,、硫含量。

采用惰性氣體保護熔融法,，提供各種無機材料,、鋼鐵、有色金屬,、硬質合金,、難熔金屬、陶瓷等材料中寬范圍的氧氮?dú)渫瑫r分析,。

該儀器配置MS Windows®的軟件接口,，專為觸摸屏操作定制。長期的開發研究與客戶反饋相結合,，這個簡單方便的軟件使得用戶可以快速完整訪問儀器控制,，分析設置，故障診斷,，數據報告,， **提高日常分析的效率并節省用戶寶貴的時間。 可選的Cornerstone® Mobile軟件功能,，使得用戶可以在手機,，便攜式電腦及臺式電腦上便捷的訪問儀器數據，分析曲線圖形以及儀器的狀態,，實現對儀器的遙控,。

上海美國LECO分析儀供應商全自動分析系統、打印機,、天平,、遠程診斷。

Procedure - Solid Samples

Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

Clean the upper and lower electrode manually, or, if applicable, remove the crucible and press the analyze button to clean with the automatic cleaner

Add approximately 0.05 g of *** Graphite Powder to a *** Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically

Sample Preparation

Typically, titanium and zirconium samples are chemically etched to remove surface contamination when oxygen and nitrogen are determined. However, etching can introduce hydrogen into the sample.

ASTM method E 1409 "Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert

Gas Fusion Technique", as updated in 1996, permits either etching or abrading (filing) of the test specimen.

ASTM E 1447 "Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal

Conductivity/Infrared Detection Method" permits surface preparation by abrading (if necessary to remove

contamination). Differences in sample preparation present somewhat of a dilemma regarding simultaneous

determination of O, N, and H in titanium. However, abrading samples with a file to remove surface

contamination will yield accurate O, N, and H results. The ONH836 utilizes a high-power electrode furnace to quickly and efficiently release the target gases from within the sample, which allows for a very rapid simultaneous determination of oxygen, nitrogen, and hydrogen.

氧氮?dú)浞治鰞x的操作過程

氧氮?dú)浞治鰞x可根據的用戶的要求定制,。該分析儀配備兩個不同靈敏度的探測器,，在更多的應用中保證了準確度。

操作簡單而且安全,。在樣品稱重以后,，樣品的重量數據通過電子界面?zhèn)鲗?dǎo)至相連的電腦中，也可以在軟件界面中手動輸入樣品的重量,。

樣品被放置在水平放置的爐子中的低溫區域,。分析開始以后,，爐子開始向上轉動，然后樣品逐漸落入加熱區,。通過添加載體氣體氮?dú)?，氫氣被擴散出來并且隨載體被傳導至一個高靈敏度的熱傳導測量池。

通常一次測量的時間在3到15分鐘之間,。在分析的過程中設備可以顯示測試信號和設備的參數,，從信號的評估到結果在界面上的顯示全部自動完成；而測量數據則被傳導至LIMS（實驗室信息管理系統）中,。無需過多的保養和維護,，而除塵器和凈化管的維護工作也方便。

OHN836系列儀器采用惰性熔融法,。安徽專業分析儀價格

Instrument calibration/drift correction.

a. Login a minimum of 3 Standard replicates.

b. Weigh a ~1.000 gram of a calibration/drift standard, enter the mass and standard identification into appropriate replicate fields.

c. Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.

d. Place the calibration/drift standard into the open port at the top of the loading head.

e. Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

安徽專業分析儀價格