· 核子級拋光樹脂杜笙 Tulsion®MB-106®UP NUCLEAR GRADE RESIN FOR PRODUCTION OF ULTRA PURE WATER杜笙TULSION®MB-106 UP是由核子級強酸型陽離子杜笙TULSION®T-46及核子級強堿型陰離子杜笙TULSION®A-33以1:2 體積比的劑量比例 , 預先混合的混床級離子交換樹脂,專門提供給須要高純水系統拋光用,。杜笙TULSION®MB-106 UPis a mixture of strongly acidic cation resin 杜笙TULSION®T-46in H+ form and strongly basic anion exchange resins 杜笙TULSION®A-33in OH- form in stoichiometric equivalent quantities. 杜笙TULSION®MB-106 UP是專門用于超純水的最后段的拋光處理,。杜笙TULSION®MB-106 UPis designed for use in the final polishing for production of ultra pure water. 杜笙TULSION®MB-106 UP適合用于電子產業 ,，生產半導體及映像管產業等需要超純水的行業。具有高的交換容量及優越的物理特性,。 杜笙TULSION®MB-106 UP is the ideal choice for electronic industries which manufacture semi-conductors and television tubes etc. where ultra pure water is required. The resin combines high capacity with excellent physical properties TYPICAL CHARACTERISTICS ---------------------------------------- 基 本 特 性
|
|
TULSION®T-46 (陽) |
TULSION®A-33 (陰) |
|
型式(Type) |
強酸性陽離子交換樹脂 (Strong acid Cation exchange resin) |
強堿性陰離子交換樹脂 (Strong base Anion exchange resin) |
|
主體結構(Matrix Structure) |
苯乙烯(Cross linked polystyrene) |
苯乙烯(Cross linked polystyrene) |
|
功能基 (Functional Group) |
硫酸基(Sulfonic acid) |
4級胺(Quaternary ammonium Type I) |
|
物理性貭(Physical Form) |
球狀顆粒(Moist spherical beads) |
球狀顆粒(Moist spherical beads) |
|
離子型式(Ionic form supplied) |
氫(Hydrogen) |
氫氧(Hydroxide) |
|
粒徑范圍(U.S.mesh in wet) |
16 to 50 |
16 to 50 |
|
粒度范圍 (Particle Size) |
0.3 to 1.2 mm |
0.3 to 1.2 mm |
|
微粒含量(Fines Content) |
穿過US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
穿過US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
|
總交換容量 (Total Exch. Capacity) |
1.8 meq/ml minimum of 99% in hydrogen form |
1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form |
|
PH范圍 (pH Range) |
0 to 14 |
0 to 14 |
|
允許溫度 (Temp. Stability) |
120°C |
60°C |
|
溶解率 (Solubility) |
Insoluble in all common solvents |
Insoluble in all common solvents |
|
溶出有機物(Organic leachable) |
Less than 0.2 mg KMNO4 per ml of wet resin |
Less than 0.2 mg KMNO4 per ml of wet resin |
|
密度Backwash settled density |
Approx.750 gm/liter |
Approx.750 gm/liter |
|
不純物(Impurities) |
Fe=50 ppm(max) |
Fe=50 ppm(max) |
|
|
Cu=50 ppm(max) |
Cu=50 ppm(max) |
|
|
Pb=50 ppm(max) |
Pb=50 ppm(max) |
|
球粒強度(Bead strength) |
Avg. not less than 500g/bead by Chatillon test (ASTM Standard) |
Avg. not less than 300g/bead by Chatillon test (ASTM Standard) |
·
文章為作者獨立觀點,，不代表淘金地立場。轉載此文章須經作者同意,，并附上出處及文章鏈接,。
分享到：
